https://www.commonhumanitycollective.org/home daily 1.0 2026-01-22 https://www.commonhumanitycollective.org/n85masks/about daily 0.75 2025-12-24 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1642049332205-O1MTN88EXTVO7C5BE69C/Brown%2BPaper%2BBag%2B-%2BCommon%2BHumanity%2BCollective.jpg About Our DIY Masks https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1642049442247-VJLUQIYS9UAOIL93HGQ1/unnamed.jpg About Our DIY Masks https://www.commonhumanitycollective.org/purifier/buildyourown daily 0.75 2025-12-24 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/cd11c0e2-448a-4bb8-af30-5463a44253b0/Screen+Shot+2021-09-30+at+3.17.13+PM.png Build Your Own 1. Unbox the fan. Insert the included plastic "feet" on the bottom frame of the fan. Keep the box. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/acd03f07-e3d8-4681-a092-87fc1a56c8bc/Screen+Shot+2021-09-30+at+3.19.00+PM.png Build Your Own 2. Optional: Gently apply foam weather stripping to the perimeter of the fan's backside frame, starting and ending at the midpoint between the feet. The foam should go over the feet, half on the edge. Avoid stretching the foam, as the corners may fall off due to tension. Total foam used should be slightly less than 6'. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/05ef3bbf-5bd2-474d-89a4-397537df17a5/Screen+Shot+2021-09-30+at+3.24.45+PM.png Build Your Own 3. Using the hot glue gun's lowest setting, gently reinforce the fan's outer rounded corners by squeezing the glue gun evenly and pushing the bead of glue in front of the tip as you apply. Avoid contact between the glue gun's metal tip and the foam, as the heat will melt the foam. (Optional: glue all around the outside perimeter of the foam to ensure the foam does not fall off) https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/ef9e0292-09d3-415e-ad4c-7e6fa194357c/Screen+Shot+2021-09-30+at+3.29.25+PM.png Build Your Own 4. Using the box's packaging or other cardboard, make a cardboard shroud. See our separate instructions for this: www.CommonHumanityCollective.org/make-an-exhaust-shroud https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/4d2e2173-9639-4a6a-a0a6-e3155100b73b/Screen+Shot+2021-09-30+at+3.44.55+PM.png Build Your Own 5. Cut each of the 4" x 4" labels diagonally in half. There should be 4 total triangles for each corner of the MERV-13 Filter. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/cad3865b-dcc7-4bae-9065-d2c977844316/Screen+Shot+2021-09-30+at+3.50.16+PM.png Build Your Own 6. Orient the filter so that the exposed wires are facing up. Apply a triangle sticker label to a corner of the MERV-13 filter to ensure the label is blocking off air flow. Repeat for all four corners. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/e23cdbf2-d8d2-467c-82e5-caf1dd555062/Screen+Shot+2021-09-30+at+3.54.17+PM.png Build Your Own 7. Place the box fan upright on its feet. Take the the MERV-13 filter and orient it so that the air flow arrow is pointing towards the back of the fan. The exposed wire should not be visible, for it will be facing the back of the fan. Check all edges to make sure the filter is on top of the foam seal. There should not be any gaps between the filter and the foam. Once properly aligned, use masking tape to temporarily secure the filter in place. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/13f9bcf3-5bcd-4f7b-9c6e-18579b8450b5/Screen+Shot+2021-09-30+at+4.03.16+PM.png Build Your Own 8. Lay the device on its side. If possible, use two people. Have each person take one end of the band and stretch the band around the fan, filter, and cardboard shroud. The band should sit right outside the fan's feet. Avoid shifting the filter, for this will break the foam seal. Repeat on the other side and make sure the bands are square and parallel. For easy transport, wrap the cord and slip under one of the bands. https://www.commonhumanitycollective.org/purifiers/about daily 0.75 2025-09-21 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1697485720184-8C5IB4HR9L9NL070P59H/distro%252B3.jpg About Our DIY Air Purifiers https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1697485749668-873AATLLDM342V2KITEO/distro%2B4.jpg About Our DIY Air Purifiers https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1697485764005-0E3QFIYQLHDP30XRMBVE/distro%252B6.jpg About Our DIY Air Purifiers https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1697485794595-79LP9Z8VIECTY9HRCKMW/distro%252B2.jpg About Our DIY Air Purifiers https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1697485700259-1R2ENCTV9DN283TS5RQO/distro%2B7.jpg About Our DIY Air Purifiers https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1697485781549-200W5QQZZO16IDLFBWXI/distro%2B1.jpg About Our DIY Air Purifiers https://www.commonhumanitycollective.org/n85masks/buildyourown daily 0.75 2024-07-07 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/772b1538-267b-4c03-8963-1fabb4a466f8/unnamed.jpg Build Your Own - Make it stand out A take-home mask kit: “Filti” (fabric mask material) might be white or green. Either performs the same. Some other items may be slightly different, but the Filti, elastic, silicone tubing, nose-bridges, and staples are required. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/7c83bfab-76af-46bb-b4d9-8df00a62ff46/unnamed-5.jpg Build Your Own - Make it stand out Front of a folded mask; should have 4 “ridges.” https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1c7f98c2-a2f3-4bb5-9206-e944c85506f8/unnamed-4.jpg Build Your Own - Make it stand out Back of the mask; should have 3 “ridges” in the middle and the edge should flap on the top and bottom. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/45832934-b10a-4d33-8094-2107daf011f0/unnamed-3.jpg Build Your Own - Make it stand out When opened up, the folds should unfurl to form a cup shape for the face. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/69be59a5-0dfd-40fe-9bef-cc76fdb994da/unnamed-2.jpg Build Your Own - Make it stand out The new packaging: 1 info card (cartoon people facing out) and 4 masks go into one narrow plastic bag https://www.commonhumanitycollective.org/about/chc daily 0.75 2025-12-24 https://www.commonhumanitycollective.org/purifier/buildyourown/es daily 0.75 2025-05-05 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/cd11c0e2-448a-4bb8-af30-5463a44253b0/Screen+Shot+2021-09-30+at+3.17.13+PM.png Hacer Tu Propio 1. Saca el ventilador de la caja. Inserta los “pies” incluidos en la parte inferior del ventilador. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/acd03f07-e3d8-4681-a092-87fc1a56c8bc/Screen+Shot+2021-09-30+at+3.19.00+PM.png Hacer Tu Propio 2. Con cuidado, pon la tira de sellado al perímetro de la parte trasera del marco del ventilador, empezando y terminando en un punto a medias entre los pies. La tira debe ir arriba de los pies y en las otras partes la mitad de la tira debe estar colocada en el borde de la marca. Evita que la tira se estire, ya que las esquinas pueden despegarse a causa de la tensión. Debería usarse un poco menos de 6 pies de tira. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/05ef3bbf-5bd2-474d-89a4-397537df17a5/Screen+Shot+2021-09-30+at+3.24.45+PM.png Hacer Tu Propio 3. Con la temperatura de la pistola pegamento en su nivel más bajo, aplica cuidadosamente más pegamento en las esquinas redondeadas, apretando el gatillo de manera uniforme y empujando la gota de pegamento enfrente de la punta de la pistola mientras aplicas el pegamento. Evita que se rocen la punta de la pistola y la tira de sellado, ya que el calor derretirá la espuma. (Opcional: Pega alrededor de todo el perímetro de la tira de sellado para que ésta no se despegue) https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/ef9e0292-09d3-415e-ad4c-7e6fa194357c/Screen+Shot+2021-09-30+at+3.29.25+PM.png Hacer Tu Propio 4. Aprovechando la caja del ventilador (o bien otra pieza de cartón), coloca el ventilador encima del cartón y traza con cuidado la silueta del ventilador. Recorta la forma aproximada con las esquinas redondeadas. Sigue recortando la pieza cuadrada, ajustándola hasta que se encaja perfectamente en la parte frontal del ventilador. Determina el radio midiendo la anchura de la vela, restando 1.5 pulgadas, y divide por 2 (así dejando 0.75 pulgadas en los dos lados donde la vela será más estrecha). Traza el recorte circular atando dos lápices con un trozo de cuerda. Esta cuerda debe ser tan larga como el radio del círculo. Coloca un lápiz en el centro de la vela (mide para determinar el punto a medias entre arriba/abajo y derecha/izquierda), estira la cuerda, y traza el círculo. Con cuidado, recorta el círculo con un cuchillo serrado o sierra. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/4d2e2173-9639-4a6a-a0a6-e3155100b73b/Screen+Shot+2021-09-30+at+3.44.55+PM.png Hacer Tu Propio 5. En diagonal, corta por la mitad cada uno de las etiquetas de 4 x 4 pulgadas. Debe haber 4 triángulos en total, uno para cada esquina del filtro MERV-13. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/cad3865b-dcc7-4bae-9065-d2c977844316/Screen+Shot+2021-09-30+at+3.50.16+PM.png Hacer Tu Propio 6. Coloca el filtro de manera que los alambres descubiertos estén para arriba. Aplica una etiqueta-pegatina en forma de triángulo a cada esquina del filtro MERV-13 para que la pegatina bloquee el fluir del aire. Repite este paso para las cuatro esquinas. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/e23cdbf2-d8d2-467c-82e5-caf1dd555062/Screen+Shot+2021-09-30+at+3.54.17+PM.png Hacer Tu Propio Coloca el ventilador en pie. Toma el filtro MERV-13 y oriéntalo de manera que la flecha que indica el sentido del flujo de aire está señalando hacia la parte trasera del ventilador. El alambre descubierto no debe ser visible, ya que estará orientado hacia la parte trasera del ventilador. Revisa todos los bordes para asegurarse de que el filtro esté bien colocado contra el sellado de espuma. No debe haber ninguna grieta entre el filtro y el sellado. Una vez que el filtro esté bien alineado, sujétalo temporalmente con cinta másking tape. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/13f9bcf3-5bcd-4f7b-9c6e-18579b8450b5/Screen+Shot+2021-09-30+at+4.03.16+PM.png Hacer Tu Propio 8. Coloca el aparato en uno de sus lados. Al ser posible, realiza este paso con dos personas. Cada una de las dos personas debería tomar un lado de la banda elástica, estrechándola alrededor del ventilador, filtro y vela de cartón. La banda debe colocarse justamente al lado externo de los pies del ventilador. Evita que se mueva el filtro, ya que esto puede romper el sellado de espuma. Repite este paso en el otro lado del aparato, asegurándose de que las bandas estén rectas y paralelas. Para facilitar el porte, enrosca la cuerda y métela debajo de una de las bandas. https://www.commonhumanitycollective.org/make-an-exhaust-shroud daily 0.75 2025-05-22 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/d6784abe-b86b-4b7f-bb7e-85ecc4f2dc01/shroud-instructions-graphics.jpg https://www.commonhumanitycollective.org/air-quality-zine daily 0.75 2024-07-17 https://www.commonhumanitycollective.org/supplies daily 0.75 2026-03-31 https://www.commonhumanitycollective.org/about/latest-update daily 0.75 2026-02-01 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/5170324b-1e81-4e2a-a39e-26162609fe56/BAWS.png Latest Update A social media post from Bay Area Workers Support that reads: "Because of you, we hit our goal and raised $2,000 to get self-defense kits into the hands of QTBIPOC street-based SWers. That is real, material safety you helped create. We’re not stopping here. We’re pushing to raise another $1,000 so we can reach more folks, provide more kits, and keep our communities safer on the streets where it matters most. Huge love to our collaborators at @savelyonmartin and @bfcoutreach for building this with us, and deep thanks to @chumanityc for hooking us up with high-quality masks. This is what mutual aid looks like: people showing up for each other. Every share, every dollar, every signal boost helps us get life-saving resources directly to the people who need them. Please keep donating, keep spreading the word, and keep holding each other with this kind of care. Love is harm reduction ♥️ Solidarity Forever!" https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/2b0198e8-99d3-45b0-bc1b-e8746a5620c9/messages_0+%2883%29.jpeg Latest Update There are two people wearing masks and baseball hats in front of a table. They each have a box fan in front of them, and they are actively applying weatherstripping to the perimeter of the fans. In the background is a canopy with a second table underneath it, and a waterfront in the distance. In the foreground is an arm pulling an elastic band across a box fan. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/a01cd725-cc2a-443c-b937-723598ab12ea/20250810_155904.jpg Latest Update On a foldout table is a blue and white portacount plus machine, with the words "N95 Companion Ready" in the top righthand corner. To the side is an open laptop and a piece of paper that reads "Community Fit Test Results" partially filled out with data. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/3991ef88-ba1d-4b0a-bf6f-cdd861dfdcee/PXL_20251026_214507214.jpg Latest Update A table full of zines, Pro-Palestine posters, and masks. Some zines include the Air Quality Resource Guide, COVID is a Labor Issue, How to Get Ready for a Demonstration, Resisting Mask Bans, and Is Your Event COVID-Safe? https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/4dd6815c-f172-4d6f-90b5-8c43f1707b91/Tabling+2.jpg Latest Update There is a table with three assembled DIY air purifiers sitting on top to the center and left, with supplies to assemble another on the right. Beneath the table is a cardboard sign that reads "Common Humanity Collective" with another assembled DIY air purifier beside it. In the background are plants and bushes. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/a002f55e-5265-4743-8d19-6faa3595d854/messages_0+%2878%29.jpeg Latest Update A social media post from Napa Solano Mask Bloc that includes a picture of several stacked columns of 3M mask boxes. The post reads "Thanks to a generous donation from @cHumanityc, if you need an N95 mask in the Napa/Solano region, I am your plug. Also, if anyone is interested in joining our mask bloc and/or helping me hand them out and/or volunteering during fire evacuations, hit me up!" https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/e5030545-b31b-4bf4-81bf-91a36747e627/20251109_145018.jpg Latest Update There is a hand holding a MESH LILYGO radio, with their shadow visible against a waterfront. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/37d638fd-00f5-44b3-9112-4b9b51581614/messages_0+%2884%29.jpeg Latest Update Two people wearing masks and baseball hats work together to assemble a mini CR box on a table (from LavNix's Drop the MIC event). There's a person out of frame behind them and a canopy above them. There's text at the bottom of the image that reads "DIY air filter- and zine-making against the medical industrial complex" https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/70e3c45f-7de3-44dd-8caa-a27b8afe3ad9/20250810_143845.jpg Latest Update There's a hand holding two wrapped straws held with a rubber band to a plastic bag showing a paper slip that says "DIY Drink Valve Guide" and shows the Common Humanity Collective logo. The out of focus background shows green grass and a bit of a tree. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/2c7e1573-7762-4efe-beff-517d32869fd7/signal-2026-01-21-175602_002.png Latest Update A social media post from Mask Bloc UC Berkeley displaying their mask board and the text "mask board restock for the first week of classes :)" On the board are a variety of masks, flyers, and COVID tests. They also have posted some DIY drink valves from CHC. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/74464bc9-f0c6-42cb-9e4b-13e4082ac3b4/messages_0+%2885%29.jpeg Latest Update There are four people holding three mini CR boxes with "Fuck ICE" stickers in the center of each fan (from LavNix's Drop the MIC event). https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/88fe26a1-1669-41a2-a1b9-4f9c0054a92b/messages_0+%2881%29.jpeg https://www.commonhumanitycollective.org/diy-drink-valves daily 0.75 2026-02-04 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/ce302c39-6410-431d-8b7b-03bdc9d3305c/3.jpg DIY Drink Valves Step 1: Figure out where you'd like your valve to be on your mask! Make sure it's not on or touching any seams. Draw a little star or x so you know where it should be. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/329daa67-939f-4f1c-900b-8b759fc8cd04/4.jpg DIY Drink Valves Step 2: Once you’ve decided on a spot, place the washer so that the spot is centered within the hole in the washer. Use a pen or marker to trace around the inner ring of the washer. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1a5dc721-a4af-4175-b536-4c0c3868fa38/5.jpg DIY Drink Valves Step 3: Cut out the circle! It might help to fold the mask in half so that the traced circle looks like a half-moon. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/8c3f35a0-ac15-4d1a-91b0-4943c605e698/6.jpg DIY Drink Valves Step 4: Starting from the inside of the mask, push the valve through the hole you just cut until it peeks out from the exterior of the mask. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/3f2a64a2-a514-4a47-b1e8-e8938d19b8ff/7.jpg DIY Drink Valves Step 5: On the outside of the mask, place the washer over the valve. Ensure that both the mask and valve have NO puckering, bending, damage, or gapping. On some masks made of a thinner material, like the FLO or Readimask, two washers may be needed to create a proper seal (request another kit in this case!). https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/c006d04d-db88-48cd-8817-e15854d4d148/8.jpg DIY Drink Valves Step 6: Ta da! You’ve successfully installed a drink valve. Place the cap over the valve while you’re not using the valve. https://www.commonhumanitycollective.org/about/summer-update daily 0.75 2026-01-31 https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/f7acb9f4-5425-4c5e-a0f8-e43c5ce1b9e5/messages_0+%2865%29.jpeg 2025 Summer Update A screenshot of an Instagram story where Resist Care Bloc shared pictures from their DIY air purifier build and tagged CHC (an organizer drove down supplies and participated in the build) https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/8fe116ed-0fe1-41a9-abc8-43f6eb469ee1/messages_0+%2867%29.jpeg 2025 Summer Update A screenshot of an Instagram post where we, along with Mask4Mask Bay Area, Mask Oakland, and Medicine for Nighmares, reportback on the number of supplies donated in the Bay Area and delivered to LA. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/2f41c485-74b8-429e-85ba-777a82144f2a/IMG_2151.jpg 2025 Summer Update Masked people building DIY air purifiers, partially underneath a canopy, partially to the side, all in front of Moments Cooperative & Community Space. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/22eae25c-d925-4680-bddf-7cde3315709e/image+%282%29.png 2025 Summer Update Most of the supplies from the CHC Metrix Kit laid out on a wood table. The kit includes: a reader (power cord & adapter), tests, extra swabs, gloves, and wipes. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/8fff486d-202b-45b3-a6ce-b7a412514bc6/messages_0+%2868%29.jpeg 2025 Summer Update A screenshot of an Instagram story with Winter Relief Fund's caption "Some pics from our last distro day! (1/26/25) We handed out care packages with hand warmers, emergency blankets, and thermal socks. We also gave out menstrual products (500 pads + 500 tampons), KN95 masks (shout out @chumanityc!), and fuzzy blankets (see the last slide to know what happens when you order 60 blankets from Costco lol)." CHC has a blurb up top saying "a beautiful example of autonomous efforts to assemble care packages for our unhoused neighbors!" https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/1753565085031-19T0SK2FYY9NXJLG6DQZ/Screenshot_20250111-185902.png 2025 Summer Update A screenshot of an Instagram story from Mask Bloc Long Beach where they say "@frontlinemedics and @resistcarebloc have been doing extremely important work (for yearssss) please support them as they step up during the fires and also shoutout to @chumanityc and Oakland folks who somehow got aid faster to LA county than the gov and drove down with much support by other mutual aid folks there" https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/cb4377b6-15a5-4914-9e16-4f010e190cb6/messages_0+%2866%29.jpeg 2025 Summer Update A screenshot of an Instagram post where we, along with Mask4Mask Bay Area, Mask Oakland, and Medicine for Nighmares, say thank you to the "organizers, donors, drivers, coordinators, Bay & LA mutual aid orgs, collaborators who hosted donation drives, & everyone who shared our posts: This happened because of YOU! We're so proud of community for coming together, responding rapidly, & upholding collective values in our organizing" https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/e3659ddd-b9ef-413e-8cd7-eb986777c4de/PXL_20250406_013316200.jpg 2025 Summer Update One of the V CR-boxes with a CHC sticker on the fan. The V CR-box uses 14x30" filters, assembles like a traditional CR box with a vornado fan on top. https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/8e0252da-6e47-4777-a3b0-ddcd602384b5/messages_0+%2869%29.jpeg 2025 Summer Update An event flyer for "The Spirit of the People is Stronger than Imperialist Bombs" saying "COVID Safety = Community Defense & Collective Care. Joint Struggle means keeping each other alive! If you are physically able to wear a mask, mask up. COVID, measles, and other viruses are still endangering us all. We need as many people masking up as possible--and as consistently as possible (i.e., when not eating or drinking outside)--to mitigate the risk of spreading airborne illness. Extra masks will be available (thank you, Common Humanity Collective!), along with rapid tests... (more in link) https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/a48f28fd-e063-4185-9730-224091e8ac86/PXL_20250419_204330057.jpg 2025 Summer Update Free rapid COVID tests in their boxes, with the words written out "Free Rapid Tests! Plz take as many as you need!" https://images.squarespace-cdn.com/content/v1/5ec5bb20ca73ae4300cda719/0b42932e-dd2a-48e8-b400-08272a680002/media.png